RaceWax Ski P-tex Base Repair Kit: 10 ptex, Metal Scraper, 3 Buffing Pads 10 black

Everything you need to repair ski and snowboard bases: P-Tex; Metal Scraper;
Three Buffing Pads. Choose black p-tex for black base areas and clear p-tex
for clear or colorized base areas. If you need both clear and black p-tex we
offer a 5/5 mix. Instructions included.P-Tex Rods for base repairs.Choose from
10 Black, 10 Clear, or 5/5 Black/Clear mix.8 mm diameter.About 190 mm long
(7.5 inches) long.Metal base scraper.Use this for P-Tex work on ski and
snowboard bases.Suitable for light base planing.Vinyl storage sleeve for metal
scraper included.3 Base Buffing/Treatment Fibertex/Scotchbrite Pads (4.5 in x
6 in) for prepping wax before overlay and buffing base after structuring.1
Medium (Maroon),1 Fine (Gray),1 Non-abrasive (White) large non-woven nylon
impregnated with ultra-fine abrasive.OPTIONAL: Core Shot Kit with Metal Grip
Ski Snowboard Base Bonding Material: Allows base material to adhere to the ski
edges and core, offering a much better bond than co-polymer. Metal grip is
designed to fill up half the repair area that is against the ski core or edge.
Once metal grip has been applied, standard p-tex base repair material is laid
over it for a finished repair. Metal grip will work for repairs where a base
patch has been the traditional method, decreasing the work time significantly.
A chisel tip soldering iron (found at tool and hardware stores) is recommended
to melt metal grip into the base.One, 1 foot rope of Black Metal GripOne, 1
foot rope of Clear Metal Grip

Features:

• Complete kit to repair ski and snowboard bases: P-Tex; Metal Scraper; Three Buffing Pads. Choose black p-tex for black base areas and clear p-tex for clear or colorized base areas. Instructions included.
• 3 Base Buffing/Treatment Fibertex/Scotchbrite Pads (4.5 in x 6 in) for prepping wax before overlay and buffing base after structuring: 1 Medium (Maroon), 1 Fine (Gray), 1 Non-abrasive (White) large non-woven nylon impregnated with ultra-fine abrasive.
• Metal base scraper. Use this for P-Tex work on ski and snowboard bases. Suitable for light base planing. Vinyl storage sleeve for metal scraper included.
• 10 P-Tex Rods for base repairs. 8 mm diameter. About 190 mm long (7.5 inches) long.
• 10 black p-tex rods